Current Directory Path: home>Lighting Systems>Strobes>Sea&Sea Strobes>YS-110 ttl  

logo


Accessories included: 4 X AA alkaline batteries, arm fixing bolt, silicone grease, O-ring, diffuser, TTL operating range and manual exposure decals

* Different cords and connectors will be required depending on the specific camera you are using. Make sure that you order the appropriatecord. Cords are sold separately.

90

The YS-110 strobe is packed with ground-breaking features designed for the new age of digital photography. When it’s connected via a fiber-optic cable to a compact digital camera with TTL metering, the YS-110 strobe offers DS-TTL (Digital Slave Through-The-Lens) light adjustment. DS-TTL follows the camera’s TTL-adjusted flash for automatically accurate flash photography. You can use two YS-110 strobes for creative effects with subtle light balance. For example, you can set one strobe to DS-TTL mode and the second strobe to manual mode. The YS-110’s mode compensation function provides a light level control dial for just the right balance of light.
The YS-110 also provides full manual control that sets flash intensity that is independent of the camera. The 12-step manual control provides a finely graded variety of light settings up to a powerful maximum setting of guide number 22. Three xenon tubes positioned in the strobe provide a flat balance all the way across a circular beam angle of 105° (with diffuser), with even and consistent light that will satisfy even finicky professionals.
The YS-110 contains a high-luminosity white LED target light located in the center of its front face. The target light turns on with a convenient button press on the strobe’s rear panel, and turns off automatically when the YS-110 flashes. You can connect the strobe to digital SLR cameras and film cameras using the same cables that connect conventional YS-series strobes. You can also connect the strobe to compact digital cameras using a fiber-optic cable.
The YS-110 is a versatile strobe designed for almost any use.

Specifications:

A: Alkaline, O: Oxyride, Ni-MH

• Guide Number (ISO 100/land) : 22
• Beam Angle : 105° x 105 °
• Batteries 4xAA : A: 6V / O: 6V / Ni-MH: 4.8V
• Number of Flashes*1 : A: 160 / O: 230 / Ni-MH: 320
• Recycle time (full)*2 : A:6 / O: 3 / Ni-MH: 3
• Color temperature : 5400K
• Color temperature w/diffuser : 5100K
• Depth rating : 60m / 200ft
• Dimensions (WxHxD) : 88x115x150mm / 3.5x4.6x6inch
• Weight : 540g / 19oz
• Under water weight : -40g / -1.4oz
• Exposure control: DS-TTL, TTL, Light level control dial (GN): 2/2.8/4/5.6/6.7/8/9.5/11/13/16/19/22 (12 steps)
•Pre-flash control : Equipped with pre-flash cancel mode (cancels one pre-flash)
•Slave function
•TTL slave (cordless TTL)
•Sync Cord: Detachable Sync Cord with film & digital SLR camera, fiber-optic cable (L-type) with a compact digital camera.
•Over-pressure relief valve.
•LED target light

*1 Number of flashes and recycle time depend on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested by 2700mAh batteries.

1
built in LED target light
2
   

 

camera housingsamphibious cameras lighting arms & brackets cases accessories
help • info request • site map • general info • home
contact usordering info • privacy

The professionals at Cameras Below are underwater photo and video equipment specialist. Cameras Below provides sales and education of underwater photo and video equipment.  Our full line includes digital camera housings, SLR housings, digital video housings and digital camera lighting as well as , amphibious cameras, strobes, strobe arms, protective cases, books and more. Let the professionals at Cameras Below guide you through the cycle of purchasing your next underwater photo or video camera. Friendly sales and advice professionals awaiting your email.

 ©2001-2008 Cameras Below LLC, all rights reserved