|
|
Sea & Sea Camera Housings Nikon D70/s  |
|
|
 
U/W Housing for the Nikon D70/s
Accessories: Housing body cap, grip stay, O-ring, silicone grease, camera quick shoe, hexagonal wrench
|
| |
The DX-D70 housing is designed for beginners and professionals alike with powerful features that are easy to use. It offers high-quality 6.1 megapixel images with a speed of capture that rivals film-based single-lens reflex cameras. Its compact and easily maneuverable body gives you the freedom to capture exactly the images you want. The DX-D70 puts the power and excitement of a new generation of digital cameras into your hands.
The N-connector, a 5-pin Nikonos-type sync connector, comes as standard equipment. It provides compatibility with Sea & Sea YS series strobes (excluding models YS-25AUTO, YS-25DX, and YS-60TTL/S).
The DX-D70 is compatible with the full range of NX ports available for the Sea & Sea Nikon housing line. These ports accommodate a variety of Nikon and Sigma lenses available for the D70. You can quickly set up the DX-D70 for exactly the image-capturing configuration you need.
[Accessories] Housing body cap, grip stay, O-ring, silicon grease, camera quick shoe, and hexagonal wrench
* Specifications and exterior design of the DX-D70 are subject to change without notice.
The DX-D70 uses the lens ports and accessories for the NX housing series.
Most NX housing lens ports, gears, and accessories are compatible with this model.
 |
The compatible zoom gear is ZOOM GEAR for AF-S DX Nikkor 18-70mm
31121 |
| *With #56201 NX Compact Macro Port Base and this #30103 Compact Wide Port L, The combination of DX-D70 (Nikon D70) and the AF-S DX Nikon 18-70mm can be used |
|
 |
[Features of the Nikon D70 camera]
- Uses the Nikon DX-format CCD for image capture. Has a 6.1 mega pixel resolution and a 23.7 x 15.6 mm image pickup area. Captures a broad dynamic range and uses a high S/N ratio to reproduce human skin and animal hair vividly and faithfully.
- Has a small and lightweight body that weighs approximately 595 grams. Has a mode dial and an illuminated display panel on the top surface of the body to offer the same convenience as a film-based single-lens reflex camera. Supports PictBridge, which allows it to connect directly to a PictBridge-compatible printer and print images recorded on a CF card.
- Starts up approximately 0.2 seconds after it's turned on and is then ready to shoot. Speeds up image data transfer and writing time to reduce shutter lag for prompt image capture and smooth continuous capture.
- Quickly processes image information, enabling continuous capture at a speed of approximately 3 frames/second up to 144 frames.
[Features of the DX-D70 housing]
- Has a comfortable and compact body design
- Works with all of the NX ports and gears in the Sea & Sea NX series housings for Nikon SLR cameras.
- Provides almost all of the Nikon D70 functions underwater.
- Controls smooth gradation in images, a feature not available in conventional compact digital cameras.
- Comes with a quick shoe that makes camera installation and removal easy.
- Has a port lock to prevent port loosening.
- Comes with a strobe connector (N-connector) as standard equipment.
- Locking latches prevent accidental opening of housing.
[Specifications of the DX-D70 housing]
- Material: Front case/ABS resin, Rear case/polycarbonate
- Maximum depth: 60 m
- Dimensions: Width 361 mm, Height 208 mm, Length 121 mm
- Weight on land: Approximately 3,200 g (housing only)
|
|
 |
|
 |
|
The housing back's large window makes it easy to view the D70/s LCD monitor underwater. |
|
|
|
 |
|
The large shutter release lever is easy to click. The D70 eliminates the shutter lag noticeable on conventional compact digital camerast. |
|
|
|
 |
|
The focus dial sets camera focus when the focus mode is set to M (manual) mode. You can easily adjust the dial while holding the grip and concentrating on your subject. |
|
|
|
 |
|
The AE/AF lock lever locks focusing. You can use it while holding the grip |
|
|
|
 |
|
The camera quick shoe makes it easy to install and remove the camera without changing gear adjustments or position. It provides a secure connection between the camera and the housing. The port lock secures the port to the housing to prevent accidental removal underwater. |
|
|
 |
|
The top of the housing provides a power switch, an exposure correction button, and a exposure button. You can press down the exposure correction and exposure mode buttons to fix them in the down position. Once fixed you can adjust them with a single hand. |
|
|
|
|
|
